Chalk porosity and sonic velocity versus burial depth: Influence of fluid pressure, hydrocarbons, and mineralogy.

Ida L. Fabricius, L. Gommesen, Anette Krogsbøll, Dan Olsen

Publikation: Bidrag til tidsskriftArtikelForskningpeer review

61 Citationer (Scopus)


Seventy chalk samples from four formations in the overpressured Danish central North Sea have been analyzed to investigate how correlations of porosity and sonic velocity with burial depth are affected by varying mineralogy, fluid pressure, and early introduction of petroleum. The results show that porosity and sonic velocity follow the most consistent depth trends when fluid pressure and pore-volume compressibility are considered. Quartz content up to 10% has no marked effect, but more than 5% clay causes lower porosity and velocity. The mineralogical effect differs between P-wave and shear velocity so that smectite-bearing chalk has a high Poisson's ratio in the water-saturated case, but a low value in the dry case. Oil-bearing chalk has up to 25 units higher porosity than water-saturated chalk at similar depth but similar velocity, probably because hydrocarbons prevent pore-filling cementation but not pore-structure stiffening cementation in this presumably water-wet chalk. These results should improve the modeling of chalk background velocity for seismic inversion analysis. When describing the porosity-reducing process, pore-volume compressibility should probably be disregarded when correcting for fluid pressure because the cementing ions originate from stylolites, which are mechanically similar to fractures. We find that cementation occurs over a relatively short depth interval.

Sider (fra-til)201-223
Antal sider23
TidsskriftAAPG Bulletin
Udgave nummer2
StatusUdgivet - feb. 2008


  • Programområde 3: Energiressourcer


Dyk ned i forskningsemnerne om 'Chalk porosity and sonic velocity versus burial depth: Influence of fluid pressure, hydrocarbons, and mineralogy.'. Sammen danner de et unikt fingeraftryk.